Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)

!±8±Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 13, 2012 23:45:17
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Discount Dow Corning Pharma-50 Tubing, 5/8" X 7/8", 50-ft Pk...

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 30mm Length (Pack of 100)

!±8±Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 30mm Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 11, 2012 09:38:30
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Saved About Bare Escentuals Buying Frisby Surround Sound

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)

!±8± Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)

Rate : | Price : | Post Date : Mar 07, 2012 23:32:34
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Steel Lock Nut, DIN, M4-0.7 (Pack of 100)

Good Bargain Small Cowboy Hat Candy Mold... Ardell Invisiband Demi Luvies Black Eyelashes... On Sale

Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)

!±8± Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)

Brand : Small Parts | Rate : | Price :
Post Date : Mar 05, 2012 03:31:11 | Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Dishwasher Built Purchase Bisquick Pancakes Quick

StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15

!±8±StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15

Brand : StarTech
Rate :
Price : $2.99
Post Date : Feb 29, 2012 19:32:57
Usually ships in 1-2 business days

This pack of 15 #6-32 mounting screws are handy for replacing or adding hard drives to your computer systems.

Brand New 2000 Fleer Tradition #35 Pedro Astacio - Colorado Rockies (baseball Car... Promotions Dii Harvest Bounty Plaid Tablecloth, 60x84... Indoor Bike Exercise Stand Save You Money!

Acetal Machine Screw, Pan Head, Phillips Drive, #8-32, 5/16" Length (Pack of 100)

!±8± Acetal Machine Screw, Pan Head, Phillips Drive, #8-32, 5/16" Length (Pack of 100)

Brand : Small Parts | Rate : | Price :
Post Date : Feb 27, 2012 08:27:04 | Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Acetal resins are characterized by their strength, stiffness, and hardness, and are stable over a wide range of temperatures, humidity, environments, and stress. Acetal has a low coefficient of friction, and absorbs little water, minimizing the effect of moisture on its physical properties. Acetal resists neutral oils, grease, petroleum-based fuels, many organic solvents, alkalis, oxidizing agents and acids, both organic and inorganic. Compared to Nylon 6/6, Acetal is harder and has better water resistance, but lower impact strength and abrasion resistance. Acetal is translucent off white in color.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Machine Screws are often used with nuts or driven into tapped holes
• Acetal is suitable where hardness and water resistance are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Aqua-pure Ap124 Universal Whole House Filter Replacement Cartridge For... Decide Now Coupon Wolverine Pst006 Large Diameter Mini Tube Cutter... Save Hoover Bh50015